2 spacing units cover this section. The Industrial Commission signed 3 orders on them between 2012 and 2015.
At a glance
640-acre unit · section 23
1,280-acre unit · sections 14 and 23
Units overlap. Each was set up by a different order and has its own well allowance.
Spacing units over this section2640 and 1,280 acres
Orders on record32012 to 2015; 3 changed something, 0 restated the rules
Most wells an order allows in the 640-acre unit1stated in 2015
Laterals that still fit3in 1 of the units; a count of space, not a plan
What happened on this land
The 640-acre unit was set up in 2015, with 1 horizontal well allowed.
The 640-acre unit (section 23). The line is the highest well count any order has stated so far: a ceiling, not wells drilled. Start dates are spud dates from the state's wells layer.
2012
Apr 5, 2012First on record
First order on record for the 1,280-acre unit across sections 14 and 23.
Order 18144 · Case 15885 · Applicant: Cornerstone Natural Resources LLC
Apr 5, 2012Well count set
Allowed up to 1 horizontal well in the 1,280-acre unit.
Order 18539 · Case 16274 · Applicant: Cornerstone Natural Resources LLC
2015
Dec 16, 2015Unit set up
Set up the 640-acre unit across section 23, with up to 1 horizontal well allowed.
Raised the 1,280-acre unit from 1 to 7 horizontal wells allowed.
Order 24396 · Case 22062
The units that cover it
A large unit can hold many more wells than its own order allows, because most of them belong to smaller units inside it. Oil totals overlap for the same reason.
Read by machine, not checked by a person. Order facts come from the signed orders of the North Dakota Industrial Commission, signed through October 21, 2026. The signed order is the rule.
A record of orders, not title or current status. Nothing here says who owns anything, and a later order can change or end a unit.
Well counts are what each order states. A later order can state a smaller number for something narrower, such as one more well. These pages show the highest count and the latest one read; neither is a statement of what is allowed today.
By section. A unit appears when the orders describe its land by section numbers in one township. Units described by lots or quarter sections may be missing, and a unit smaller than its sections covers only part of them.
Oil is as first reported in the free NDIC Monthly Production Reports, January 2003 to August 2026, for horizontal wells with at least 660 ft of lateral inside a unit, whatever formation they produce from. Overlapping units count the same barrels.
Units and wells come from the state's free GIS layers (spacing units of October 17, 2026, wells of November 1, 2026). A well's status is the Industrial Commission's code, not a judgement.
Not legal, engineering or investment advice. Corrections: see contact.