3 spacing units cover this section. The Industrial Commission signed 3 orders on them between 2014 and 2026, and 2 of those changed something.
At a glance
2,560-acre unit · sections 4, 5, 8 and 9
2,560-acre unit · sections 4, 9, 16 and 21
5,120-acre unit · sections 3, 4, 9, 10, 15, 16, 21 and 22
Units overlap. Each was set up by a different order and has its own well allowance.
Spacing units over this section32,560 and 5,120 acres
Orders on record32014 to 2026; 2 changed something, 1 restated the rules
Most wells an order allows in the 2,560-acre unit over sections 4, 5, 8 and 91stated in 2014
Laterals that still fit5in 2 of the units; a count of space, not a plan
What happened on this land
The 2,560-acre unit over sections 4, 5, 8 and 9 was set up in 2014, with 1 horizontal well allowed.
The 2,560-acre unit over sections 4, 5, 8 and 9 (sections 4, 5, 8 and 9). The line is the highest well count any order has stated so far: a ceiling, not wells drilled. Start dates are spud dates from the state's wells layer.
2014
Jun 16, 2014Unit set up
Set up the 2,560-acre unit over sections 4, 5, 8 and 9, with up to 1 horizontal well allowed.
Order 23595 · Case 21291 · Applicant: HRC Operating, LLC
2026
Jun 9, 2026Unit set up
Set up the 2,560-acre unit over sections 4, 9, 16 and 21, with up to 4 horizontal wells allowed.
Allowed up to 1 lease-line well in the 5,120-acre unit, running north–south.
Order 35747 · Case 32821 · Applicant: Kraken Operating, LLC
1 more order restated the rules without changing them
Jun 9, 2026: Order 35748 (case 32822), Kraken Operating, LLC
The units that cover it
A large unit can hold many more wells than its own order allows, because most of them belong to smaller units inside it. Oil totals overlap for the same reason.
Read by machine, not checked by a person. Order facts come from the signed orders of the North Dakota Industrial Commission, signed through October 21, 2026. The signed order is the rule.
A record of orders, not title or current status. Nothing here says who owns anything, and a later order can change or end a unit.
Well counts are what each order states. A later order can state a smaller number for something narrower, such as one more well. These pages show the highest count and the latest one read; neither is a statement of what is allowed today.
By section. A unit appears when the orders describe its land by section numbers in one township. Units described by lots or quarter sections may be missing, and a unit smaller than its sections covers only part of them.
Oil is as first reported in the free NDIC Monthly Production Reports, January 2003 to August 2026, for horizontal wells with at least 660 ft of lateral inside a unit, whatever formation they produce from. Overlapping units count the same barrels.
Units and wells come from the state's free GIS layers (spacing units of October 17, 2026, wells of November 1, 2026). A well's status is the Industrial Commission's code, not a judgement.
Not legal, engineering or investment advice. Corrections: see contact.