5 spacing units cover this section. The Industrial Commission signed 7 orders on them between 2010 and 2025.
At a glance
640-acre unit · section 9
1,280-acre unit · sections 4 and 9
2,546-acre unit · sections 8, 9, 16 and 17
2,560-acre unit · sections 3, 4, 9 and 10
Units overlap. Each was set up by a different order and has its own well allowance. 1 larger unit is listed below.
Spacing units over this section5640 to 3,840 acres
Orders on record72010 to 2025; 7 changed something, 0 restated the rules
Most wells an order allows in the 640-acre unit4in 2011; the latest order read (2018) states 2
Horizontal wells with laterals in that unit77 active; started 2011 to 2023
Laterals that still fit4in 1 of the units; a count of space, not a plan
What happened on this land
The 640-acre unit was set up in 2010, with 1 horizontal well allowed. An order in 2011 raised that to 4. The latest order read, in 2018, states 2; a smaller number usually covers something narrower, not fewer wells for the unit. 7 horizontal wells have laterals in it, started between 2011 and 2023.
The 640-acre unit (section 9). The line is the highest well count any order has stated so far: a ceiling, not wells drilled. Start dates are spud dates from the state's wells layer.
2010
Jan 8, 2010Unit set up
Set up the 640-acre unit across section 9, with up to 1 horizontal well allowed.
Order 13965 · Case 11798 · Applicant: Peak ND, LLC
2011
Jul 18, 2011Pooled
Pooled the 640-acre unit: the owners' interests across it are combined, and all share in its wells.
Order 17143 · Case 14867 · Applicant: DAKOTA-3 E&P Co., LLC
Nov 15, 2011More wells allowed
Raised the 640-acre unit from 1 to 4 horizontal wells allowed.
Order 18238 · Case 15976 · Applicant: DAKOTA-3 E&P Co., LLC
2018
Jul 20, 2018Unit set up
Set up the 1,280-acre unit across sections 4 and 9, with up to 10 horizontal wells allowed.
States up to 2 horizontal wells for the 640-acre unit; an earlier order stated up to 4.
Order 28992 · Case 26559 · Applicant: Enerplus Resources (USA) Corp.
2022
Jun 10, 2022Well count set
Allowed up to 2 lease-line wells in the 2,546-acre unit, running north–south.
Allowed up to 1 lease-line well in the 2,560-acre unit, running north–south.
Restated the rules for the 1,280-acre unit (10 wells).
Order 31787 · Case 29219 · Applicant: Enerplus Resources (USA) Corporation
2023
May 12, 2023Well count set
Allowed up to 1 lease-line well in the 3,840-acre unit, running north–south.
Restated the rules for the 1,280-acre unit (10 wells).
Referred to the 2,546-acre unit.
Restated the rules for the 2,560-acre unit (1 lease-line well).
Order 32494 · Case 29885 · Applicant: Enerplus Resources (USA) Corporation
2025
Jul 8, 2025First on record
First order on record for the 2,560-acre unit across sections 3, 4, 9 and 10.
First order on record for the 3,840-acre unit across sections 4, 5, 8, 9, 16 and 17.
Order 34228 · Case 31506 · Applicant: Enerplus Resources (USA) Corp.
The units that cover it
A large unit can hold many more wells than its own order allows, because most of them belong to smaller units inside it. Oil totals overlap for the same reason.
640 acresSection 9
Set up
Jan 2010 · Order 13965
Most wells an order allows
4 · 2011
Latest count read
2 · 2018
Last real change
Jul 2018
Wells with laterals inside
7
Pool
South Fork-Bakken
1,280 acresSections 4 and 9
Set up
Jul 2018 · Order 28992
Most wells an order allows
10 · 2018
Last real change
Jul 2018
Wells with laterals inside
9
Oil reported
2,012,014 bbl
Laterals that still fit
4
Pool
South Fork-Bakken
2,546 acresSections 8, 9, 16 and 17
From the orders only; not in the state's current unit layer.
Read by machine, not checked by a person. Order facts come from the signed orders of the North Dakota Industrial Commission, signed through October 21, 2026. The signed order is the rule.
A record of orders, not title or current status. Nothing here says who owns anything, and a later order can change or end a unit.
Well counts are what each order states. A later order can state a smaller number for something narrower, such as one more well. These pages show the highest count and the latest one read; neither is a statement of what is allowed today.
By section. A unit appears when the orders describe its land by section numbers in one township. Units described by lots or quarter sections may be missing, and a unit smaller than its sections covers only part of them.
Oil is as first reported in the free NDIC Monthly Production Reports, January 2003 to August 2026, for horizontal wells with at least 660 ft of lateral inside a unit, whatever formation they produce from. Overlapping units count the same barrels.
Units and wells come from the state's free GIS layers (spacing units of October 17, 2026, wells of November 1, 2026). A well's status is the Industrial Commission's code, not a judgement.
Not legal, engineering or investment advice. Corrections: see contact.