2 spacing units cover this section. The Industrial Commission signed 1 order on them in 2017.
At a glance
640-acre unit · section 19
1,280-acre unit · sections 18 and 19
Units overlap. Each was set up by a different order and has its own well allowance.
Spacing units over this section2640 and 1,280 acres
Orders on record12017; 1 changed something, 0 restated the rules
Most wells an order allows in the 640-acre unit1stated in 2017
Horizontal wells with laterals in that unit11 active; started 1989
Laterals that still fit5in 1 of the units; a count of space, not a plan
What happened on this land
The 640-acre unit was set up in 2017, with 1 horizontal well allowed. 1 horizontal well has laterals in it, started in 1989.
The 640-acre unit (section 19). The line is the highest well count any order has stated so far: a ceiling, not wells drilled. Start dates are spud dates from the state's wells layer.
2017
Mar 20, 2017Unit set up
Set up the 640-acre unit across section 19, with up to 1 horizontal well allowed.
Set up the 1,280-acre unit across sections 18 and 19, with up to 4 horizontal wells allowed.
Order 27690 · Case 25286 · Applicant: NP Resources, LLC
The units that cover it
A large unit can hold many more wells than its own order allows, because most of them belong to smaller units inside it. Oil totals overlap for the same reason.
Read by machine, not checked by a person. Order facts come from the signed orders of the North Dakota Industrial Commission, signed through October 21, 2026. The signed order is the rule.
A record of orders, not title or current status. Nothing here says who owns anything, and a later order can change or end a unit.
Well counts are what each order states. A later order can state a smaller number for something narrower, such as one more well. These pages show the highest count and the latest one read; neither is a statement of what is allowed today.
By section. A unit appears when the orders describe its land by section numbers in one township. Units described by lots or quarter sections may be missing, and a unit smaller than its sections covers only part of them.
Oil is as first reported in the free NDIC Monthly Production Reports, January 2003 to August 2026, for horizontal wells with at least 660 ft of lateral inside a unit, whatever formation they produce from. Overlapping units count the same barrels.
Units and wells come from the state's free GIS layers (spacing units of October 17, 2026, wells of November 1, 2026). A well's status is the Industrial Commission's code, not a judgement.
Not legal, engineering or investment advice. Corrections: see contact.